Steering Gears with Hardware Fits John Deere Replaces 14M7400

Description

One New Aftermarket Steering Gears with Hardware

Tech Info:
-(1) Sector Gear
-25 Teeth
-Replaces Part Number(s): GX20052, GX20052BLE
–
-(1) Pinion Gear
-HRC 30
-Height: 1″
-OD: 1-3/8″
-Replaces Part Number(s): GX20053
–
-(2) Steering Gear Bushing
-Flange Thickness 0.16″
-Flange Outside Diameter 1.382″
-Inside Diameter 0.407″
-Length 0.45″
-Outside Diameter 0.710″
-Replaces Part Number(s): UC13360, GX20054
–
-(2) Steering Shaft Bushing
-I.D.: .625″
-O.D.: .900″
-Height: .870″
-Flange OD: 1″
-Replaces Part Number(s): GX21994
–
-(1) Steering Bolt
-Diameter: 10mm (0.39)
-Length: 35mm (1-3/8)
-Replaces Part Number(s): 19M7835
–
-(1) Hexagonal Lock Nut – M10
-Flange Diameter: 21.80mm
-Wrench Height: 5.60mm
-Thickness: 13.50mm
-Replaces Part Number(s): 14M7400

Made to Fit John Deere:
Replaces Part Number(s): GX20052, GX20052BLE, GX20053, 19M7835, 14M7400, GX21994, UC13360, GX20054
Additional Information: (1) Sector Gear 25 Teeth Replaces Part Number(s): GX20052, GX20052BLE (1) Pinion Gear HRC 30 Height: 1″ OD: 1-3/8″ Replaces Part Number(s): GX20053 (2) Steering Gear Bushing Flange Thickness 0.16″ Flange Outside Diameter 1.382″ Inside Diameter 0.407″ Length 0.45″ Outside Diameter 0.710″ Replaces Part Number(s): UC13360, GX20054 (2) Steering Shaft Bushing I.D.: .625″ O.D.: .900″ Height: .870″ Flange OD: 1″ Replaces Part Number(s): GX21994 (1) Steering Bolt Diameter: 10mm (0.39) Length: 35mm (1-3/8) Replaces Part Number(s): 19M7835 (1) Hexagonal Lock Nut – M10 Flange Diameter: 21.80mm Wrench Height: 5.60mm Thickness: 13.50mm Replaces Part Number(s): 14M7400